Electric Skateboard Battery & ESC Enclosures

Need help choosing? Scroll down past the products for our buying guide, compatibility info and FAQ.

Skip to results list

Active filters:

9 items
Column grid
Column grid

Filter

Active filters:

Shop electric skateboard battery enclosures and ESC enclosures for your battery pack and speed controller: a 6061 aluminum enclosure for Verreal RS-series boards, a metal enclosure for RS, RS Pro and TTRS, a battery and ESC case for Verreal ACE, F1 and Mini, and deck and enclosure kits for DIY builds. Every enclosure lists its inside size, so you can check a skateboard battery enclosure against your own pack before you order. Silicone gaskets, M5 screws and foam pads are available as parts.

Battery and ESC enclosures: which one fits

Enclosure Fits Inside Good to know
6061 aluminum battery and ESC enclosure Verreal RS series 57 x 19 x 3 cm; battery pack up to 50 x 19 x 3 cm 5 mm aluminum body; nylon and glass fiber end caps with antenna mounts; optional 3 mm silicone gasket
Metal enclosure Verreal RS, RS Pro, TTRS 55 x 15.5 x 2.6 cm Aluminum body with plastic ends; fits 10S4P 18650 cells, with room for 10S4P 21700 cells
Battery and ESC enclosure Verreal ACE, F1, Mini Battery pack space 15.5 x 19 x 5.5 cm (fits 14S2P 21700) Fiberglass, nylon and aluminum; built-in heat dissipation pad; available with a silicone gasket
DIY deck and enclosure, 60 cell DIY builds Battery space 60 x 27 x 4 cm (60 x 21700 cells) Enclosure with gasket, or full kit with a 106 x 29 cm maple and fiberglass deck; screws and inserts included
DIY deck and enclosure, 120 cell DIY builds Battery space 60 x 27 x 5 cm Same deck and enclosure size as the 60 cell kit, with more height for the pack
Battery case and ESC case Separate cases for DIY builds Battery case 202 x 196 x 45 mm; ESC case 188 x 157 x 35 mm ABS cases with a foam pad; the battery case has a charging port, the ESC case a power indicator and switch

Enclosures for DIY and non-Verreal skateboards

You do not need a Verreal board to use these enclosures. For a DIY build or another brand of electric skateboard, check these points first:

  • Battery pack size: measure length, width and height, then compare with the inside size in the table. Leave room for foam so the pack cannot move.
  • ESC size: the ESC case and the combined battery and ESC enclosures have different inside sizes. Check which one your ESC needs.
  • Mounting: the RS enclosure uses M5 screws. The DIY deck and enclosure kits include screws and inserts.
  • Sealing: a 3 mm silicone gasket closes the gap between the enclosure and the deck.

Need a pack for your enclosure? Browse our electric skateboard battery packs.

How to choose an electric skateboard enclosure

  • Start with your board. The aluminum enclosure is made for the Verreal RS series deck, the metal enclosure for RS, RS Pro and TTRS, and the battery and ESC enclosure for ACE, F1 and Mini.
  • Compare the inside size with your battery pack. Measure the pack, check it against the inside size in the table, and leave room for foam so it cannot move.
  • Decide on a gasket. A 3 mm silicone gasket closes the gap between the enclosure and the deck to help keep dust and water out. It is optional on the aluminum and ACE, F1 and Mini enclosures, and included in the DIY deck and enclosure kits.
  • Order the hardware. The RS battery enclosure uses 10 M5 screws; the screw set below has 12. EVA foam pads are listed for the old Verreal F1 metal enclosure.

FAQ: electric skateboard enclosures

What is an ESC enclosure?

An ESC enclosure is the case that holds and protects the electronic speed controller (ESC) under the deck. Our Verreal RS, ACE, F1 and Mini enclosures hold the battery pack as well, so one case works as both a battery enclosure and an ESC enclosure.

What is the difference between a battery enclosure and an ESC enclosure?

A battery enclosure holds the battery pack and an ESC enclosure holds the electronic speed controller. Some of our enclosures hold both, so one case works as a battery and ESC enclosure.

Which enclosure fits my Verreal board?

Use the aluminum enclosure for the RS series, the metal enclosure for RS, RS Pro and TTRS, and the battery and ESC enclosure for ACE, F1 and Mini. If you are unsure, write to us with your board model.

Can I use my own battery pack in an enclosure?

Yes, if it fits inside. Compare the size of your pack with the inside size of the enclosure, and send us your pack dimensions if you want us to check.

How do I attach a battery enclosure to the deck?

Our RS enclosure is screwed to the deck with M5 screws, and the DIY deck and enclosure kits include screws and inserts. A silicone gasket sits between the enclosure and the deck.

Do I need a silicone gasket?

It is optional on the aluminum enclosure and the ACE, F1 and Mini enclosure. It closes the gap between the enclosure and the deck. The DIY deck and enclosure kits already include a gasket.